Cost of Asphalt Driveway Calculator

Last updated: 13 Sep 2025 | Author: Brij | Review By: Irshad

Share on :

Easily estimate the cost of an asphalt driveway with our free calculator. Enter length, width, thickness, material price, density, and labor cost to get accurate project cost estimates.

Driveway Length:

Driveway Width:

Asphalt Thickness:

Residential: 2-3", Commercial: 3-4"+

Asphalt Cost per Ton:

$ /ton

Typically $100-150 per ton

Asphalt Density:

Typically 2.2-2.5 tons per cubic yard

Labor Cost:

$ /sq ft

Typically $2-5 per square foot

Additional Cost Factors (Optional)

Grading/Prep Cost:

Gravel Base Cost:

Drainage Cost:

Asphalt Driveway Cost Estimation

Estimated Asphalt Driveway Cost:

Cost Breakdown

Driveway Area: 0 sq ft

Asphalt Volume: 0 cu yd

Asphalt Tonnage: 0 tons

Asphalt Material Cost: $0.00

Labor Cost: $0.00

Grading/Prep Cost: $0.00

Gravel Base Cost: $0.00

Drainage Cost: $0.00

Total Cost: $0.00

Asphalt Driveway Information

Typical Cost Ranges:
- Asphalt Material: $100-150 per ton
- Labor: $2-5 per square foot
- Total Installed Cost: $7-13 per square foot
- Average Driveway: $4,000 - $7,500

Calculation Formula:
Area = Length × Width
Volume = Area × Thickness
Tonnage = Volume × Density
Asphalt Cost = Tonnage × Cost per ton
Labor Cost = Area × Labor Rate

Installing or resurfacing an asphalt driveway can be a big investment. The total cost depends on the size of your driveway, the thickness of asphalt applied, the cost of materials, and labor charges. Our Cost of Asphalt Driveway Calculator helps you quickly estimate your project cost.

This calculator uses standard formulas to compute the asphalt required and then applies material and labor costs to estimate the total expense.

Step-by-Step Formula for Asphalt Driveway Cost

Step 1: Calculate Area of the Driveway

$\text{Area} = \text{Length} \times \text{Width}$

Step 2: Convert Thickness to Feet

$\text{Thickness (ft)} = \frac{\text{Thickness (in)}}{12}$

Step 3: Calculate Volume of Asphalt

$\text{Volume (ft}^3\text{)} = \text{Area} \times \text{Thickness}$

Step 4: Convert Volume to Cubic Yards

$\text{Volume (yd}^3\text{)} = \frac{\text{Volume (ft}^3\text{)}}{27}$

Step 5: Calculate Asphalt Tonnage

$\text{Tonnage} = \text{Volume (yd}^3\text{)} \times \text{Density (tons/yd}^3\text{)}$

Step 6: Calculate Material Cost

$\text{Material Cost} = \text{Tonnage} \times \text{Asphalt Cost per Ton}$

Step 7: Calculate Labor Cost

$\text{Labor Cost} = \text{Area} \times \text{Labor Cost per Unit Area}$

Step 8: Total Driveway Cost

$\text{Total Cost} = \text{Material Cost} + \text{Labor Cost}$

Example Calculation

Suppose you want to install a new asphalt driveway with the following details:

Length = 100 ft
Width = 12 ft
Thickness = 3 in
Asphalt Density = 2.2 tons/yd³
Asphalt Cost = $120 per ton
Labor Cost = $3 per sq.ft

Step 1: Area

$\text{Area} = 100 \times 12 = 1200 \, \text{ft}^2$

Step 2: Thickness in feet

$\text{Thickness} = \frac{3}{12} = 0.25 \, \text{ft}$

Step 3: Volume

$\text{Volume} = 1200 \times 0.25 = 300 \, \text{ft}^3$

Step 4: Volume in cubic yards

$\text{Volume (yd}^3\text{)} = \frac{300}{27} \approx 11.11 \, \text{yd}^3$

Step 5: Asphalt Tonnage

$\text{Tonnage} = 11.11 \times 2.2 \approx 24.44 \, \text{tons}$

Step 6: Material Cost

$\text{Material Cost} = 24.44 \times 120 \approx \$2933.33$

Step 7: Labor Cost

$\text{Labor Cost} = 1200 \times 3 = \$3600$

Step 8: Total Cost

$\text{Total Cost} = 2933.33 + 3600 = \$6533.33$

Final Answer: The estimated asphalt driveway cost is $6533.33.

FAQs: Cost of Asphalt Driveway

1. What is the average cost to install an asphalt driveway in 2025?

The average cost for a new asphalt driveway installation in 2025 ranges from $3,000 to $7,400, with most homeowners paying around $5,260 for a standard 600-square-foot driveway. This typically breaks down to $7 to $15 per square foot, including materials and labor, though prices can vary based on size, location, and site preparation needs.

2. What factors influence the cost of an asphalt driveway?

Several factors affect the total cost, including driveway size (larger areas cost more due to increased materials and labor), asphalt type (e.g., recycled asphalt at $6–$9 per square foot vs. stamped at $10–$17 per square foot), site preparation like excavation or grading ($2–$5 per square foot extra), and regional labor rates. Additional features such as permeable or heated asphalt can add $2–$12 per square foot.

3. How does resurfacing compare to full replacement in cost?

Resurfacing an existing asphalt driveway is more affordable, costing $2–$5 per square foot (or $1,200–$3,000 for a 600-square-foot driveway) since it overlays the current surface without demolition. Full replacement, at $7–$15 per square foot, is pricier due to removal of old material and deeper base work but is recommended for severely damaged driveways to ensure longevity.

Check out 0 similar Cost of Asphalt Driveway Calculator :

Help Improve This Calculator

Your suggestions help us make better tools for everyone.