What Is a Window Curtain Calculator?
A Window Curtain Calculator is a planning tool that estimates the width and length of curtains based on your window or curtain rod measurements, desired fabric fullness, and preferred curtain drop. It helps you choose suitable curtain dimensions before buying or sewing fabric. The estimate is a starting point; remember to allow extra fabric for hems, seams, and the curtain heading.
How to Calculate Curtain Width
Multiply the window or curtain rod width by the fullness factor to estimate the total fabric width. If the rod extends beyond the window, use the rod width for a more suitable estimate.
Curtain Fabric Width=Rod Width×Fullness Factor
Common fullness factors include:
- 1.5×: Light gathering
- 2×: Standard gathering
- 2.5×–3×: Fuller, more gathered appearance
This estimates the total fabric width before accounting for hems, seams, or the number of curtain panels.
How to Calculate Curtain Height
Measure from the curtain rod to the desired bottom edge of the curtain. Add or subtract length depending on the style and hardware.
Curtain Height=Rod-to-Floor or Rod-to-Sill Measurement+Style Allowance
For example, floor-length curtains may stop just above the floor, touch it, or extend beyond it for a puddled look. The appropriate allowance depends on your preferred finish and the curtain heading.
Example Calculation
Suppose the rod width is 1.5 meters and you want a fullness factor of 2:
Curtain Fabric Width=1.5×2=3 m
You need approximately 3 meters of total fabric width, before adding allowances for hems, seams, and panel construction.
If the distance from the rod to the floor is 2.5 meters and you want the curtains to finish 10 cm above the floor:
Curtain Height=2.5−0.1=2.4 m
The estimated curtain height is 2.4 meters. Measure from the rod—not the top of the window—because rod placement determines the finished curtain length.
FAQs
How much wider should curtains be than the window?
Curtain fabric is commonly 1.5 to 3 times the rod width, depending on how gathered you want it to look. Use a higher fullness factor for a fuller appearance.
Should I measure the window or the curtain rod?
For curtain width, measure the rod or the area you want the curtains to cover. If the rod extends past the window frame, using the rod width helps the curtains cover the opening when closed.
Where should I measure curtain height from?
Measure from the top of the curtain rod or track to the intended bottom edge of the curtain. Consider the curtain heading and hardware, since they can affect the finished drop.
How long should floor-length curtains be?
They can finish just above the floor, lightly touch it, or extend past it for a puddled effect. Choose the finish you prefer and measure to that point.
Does the calculator include hems and seams?
The result is an estimate of the main curtain dimensions. Add fabric for hems, seams, pattern matching, and other sewing allowances as needed.
This video may be helpful for you.
Check out 4 Similar Calculators: